|
 |
|
 |
| |
|
|
 |
|
 |
Endress+Hauser
factory-authorized
service provider |
|
Compac
Erecta Switch™
|
|
Factory-approved assemblies |
|
Flow,
Liquid Level, and Temperature Sensing Switches
|
|
Industries Served:
Automation
Systems
Brewing
Chemical
Dairy
Environmental
Ethanol & Alternative Fuels
Food & Beverage
Foundry & Metals
Heat Treating
Machine Builders
Mining
Pharmaceutical
Process Skid Manufacturers
Pulp & Paper
Vendor Managed Inventory
Waste & Water
|
| |
|
 |
|
|
| |
|
 |
Options |
|
|
To specify an option, add the option
designator to the end of the part number. the part will be supplied in the
same material as the level system where appropriate.
|
|
 |
2"
NPT adapter fitting
(10-700-AS)
Designator: 2N |
PP
(Polypropylene)
AC (Acetal)
KR (Kynar) |
 |
1-1/4"
flange nut with seal
(10-700-FS)
Designator: FN |
PP
(Polypropylene)
AC (Acetal)
KR (Kynar) |
 |
Two
flange nuts for
bulkhead mounting.
Includes one 1-1/4" flange
nut with seal and one
flange nut without seal
Designator: FB |
PP
(Polypropylene)
AC (Acetal)
KR (Kynar) |
 |
Temperature
switch in
place of one level
(10-800-____)
Note: Temperature range
and operation needs to be
specified. Indicate
temperature set point code
letter from the table below.
Designator: TS(___) |
PP
(Polypropylene)
AC (Acetal)
KR (Kynar) |
|
Contacts open on rise |
Contacts
close on rise |
Temperature
Set Point °C |
Identity
Code Letter |
Temperature
Set Point °C |
Identity
Code Letter |
| 0-5 |
A |
0-5 |
I |
| 40 |
B |
40 |
J |
| 50 |
C |
50 |
K |
| 60 |
D |
60 |
L |
| 70 |
E |
70 |
M |
| 80 |
F |
80 |
N |
| 90 |
G |
90 |
O |
| 100 |
H |
100 |
P |
 |
Slosh
shield. Put SS
behind any switch level
that requires a shield. If
SS is used at the end of
the part number, all levels
will get a slosh shield.
Designator: SS
(Price adder per level.) |
PP
(Polypropylene)
AC (Acetal)
KR (Kynar) |
 |
Liquid
tight strain relief
(10-701-WC)
Designator: SR |
Nylon |
 |
4-pole DIN
connector
(931297-004)
and cable plug
(932109-100)
with Buna gasket
(730-801-002)
Accepts wire jackets from
6-10mm in diameter
Designator: DN |
|
|
